Dromida Ominus FPV User Manual

Browse online or download User Manual for Toys Dromida Ominus FPV. Dromida Ominus FPV User Manual [en] [pl] [cs] [de]

  • Download
  • Add to my manuals
  • Print
  • Page
    / 8
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 0
Radio Controlled
Quadcopter
Ominus Quadcopter
Flight
Battery
2G Memory
Card
Card Reader
Spare Blades
(2 black, 2 color)
AA
Batteries (4)
Controller
USB Charger
Phone Mount
Light Shield
CHARGING
NEVER leave the battery unattended while charging.
DO NOT allow the USB port to power down while the
charger is connected to the battery.
ALWAYS unplug the charger from the USB port and
the battery when charging is complete.
Plug the charger into a USB port or AC adapter (not included) as shown and connect the battery.
The charger LED is steady on when charging. The LED flashes when charge is complete.
INSTALL BATTERIES INTO RADIO
Slide the cover down and insert 4 AA batteries.
LINKING
1. Turn on the radio with the throttle
at its lowest position.
2. Connect the battery to the Ominus and place it on a level
surface. The LED on the quad will flash rapidly when the
quad is linked to the radio and ready to fly.
ALWAYS unplug the battery after flying!
BEFORE FLYING, PLEASE
READ & UNDERSTAND
THESE INSTRUCTIONS!
and go to www.knowbeforeyoufly.org
POWER SWITCH
Page view 0
1 2 3 4 5 6 7 8

Summary of Contents

Page 1 - Quadcopter

™Radio ControlledQuadcopterOminus QuadcopterFlight Battery 2G Memory CardCard ReaderSpare Blades(2 black, 2 color)AABatteries (4)ControllerUSB Charger

Page 2 - DUAL RATES

LOW BATTERY INDICATOR The LEDs on the Ominus will flash slowly when the battery voltage is low. The Ominus FPV should be landed as soon as possible to

Page 3

If the quadcopter is constantly drifting in the same direction or a new flight control board has been installed, the sensors on the Ominus should be c

Page 4 - TROUBLESHOOTING

BLADE REPLACEMENT FRONTColor Blades,Color LEDsREARBlack Blades,White LEDs1. Remove screw that secures the rotor blade to the gear shaft.2. Pull prop o

Page 5 - GEAR SHAFT REPLACEMENT

GEAR SHAFT REPLACEMENT 1. Remove the rotor blade from the gear shaft.2. Push the shaft down to remove it from the gear.3. Install the new gear shaft a

Page 6 - SAFETY PRECAUTIONS

REPLACEMENT PARTS 1 DIDE1150 Canopy GREEN 1 DIDE1151 Canopy RED 1 DIDE1152 Canopy BLUE 1 DIDE1153 Canopy YELLOW 2 DIDE1154 Prop Set GREEN

Page 7 - FCC REQUIREMENT

90-DAY LIMITED WARRANTY PLEASE DO NOT RETURN YOUR PRODUCT TO THE STORE. Dromida will repair or replace factory defects for 90 days from the date of p

Page 8

dromida.comDIDE02xx Mnl v1.1 • © 2015 DROMIDA, A HOBBICO COMPANY

Comments to this Manuals

Dan 19 May 2024 | 10:32:44

Where exactly does someone get a motor that small.