Dromida DIDC1150 User Manual

REQUIRED TOOLS The following items are needed to install your Speed Kit.✔ Phillips head screw driver✔ 3/16" nut driver✔ 1.5mm hex wrench✔ 2mm

4. REMOVE MOTOR 5. REMOVE RIGHT SIDE TIE ROD 6. REMOVE BELLCRANK Remove the motor assembly from the chassis.Remove the set screw from the pinion for u

7. INSTALL NEW BELLCRANK 8. INSTALLING BRUSHLESS MOTOR Slide the bellcrank onto the shaft. Attach the steering drag link using the screw removed in st

10. RE-INSTALL SPUR GEAR COVER AND BRACE Re-install the motor guard and upper chassis brace. Make sure that the bellcrank shafts remain seated in the

13. ESC INSTALLATION Clean both the bottom of ESC and chassis with alcohol. Using double sided tape, attach ESC to chassis as shown. Connect the ESC t